MAXAM TIRE advises forklift tire safety tips for National Forklift Safety Day

25 мая, 2022

MAXAM TIRE advises forklift tire safety tips for National Forklift Safety Day

With increased demands, it’s important to ensure maximum efficiency. Forklift tires play a major role in ensuring operator’s safety & maximizing productivity. It’s important to know how to tell when it’s time to change your tires. Below are some tire safety & maintenance tips to identify when to change your tires.

Here are the four signs to determine when to replace your tire:

1. Tire wear and balding

Both pneumatic and solid tires will become less effective as their tread wears down. For pneumatic tires, if the tread is nearly gone or you notice bald spots, it’s time to replace the tires. For solid cushion tires, once the tire reaches 1/3 of the nominal section height, it’s time for new tires. For resilient tires, if the tire reaches the 60J line, it’s time to replace the tires.

2. Tire chunking

If pieces or chunks of your forklift tires are falling off, that’s a good sign you need to replace them.

3. Tearing on tires

Similar to chunking, if your tires are tearing off in spots, they need to be replaced.

4. Flat spots

Similar to chunking, if your tires are tearing off in spots, they need to be replaced.

Other than checking for signs of potential tire replacement, other key inspection points include:

1. Uneven tire wear

Check if there are any uneven signs of wear on each tire. There could be an underlying issue that is causing premature wear due to the road condition or the application.

2. Air pressure

Tires that aren’t filled to the proper pressure will wear out more quickly than tires filled to the correct PSI. Overinflation can also result in excessive tire wear.

3. Load

While you don’t want to overload the lift truck, running the forklift without a load also shortens your tire life. Without a load on the forks, the counterweight presses down on the steer tires which causes them to wear more quickly.

Forklift tires play a key role not only in the efficiency of an operation but also the safety. After a tire has worn 40%, the forklift and the driver will absorb over 84% of the shock if it’s being run over a rough surface. The transmission has to work much harder to turn the tires the same amount of rotation, which can result in a breakdown. Therefore, maintaining tires is an inexpensive way to keep your forklift and operator in good condition.

For additional information, contact your local representative or visit us at maxamtire.com.

Центр ресурсов

MAXAM Tire — мировой лидер и производитель специализированных шин, разработанных и изготовленных специально для вас.

EcoPoint³’s effect on reducing heat buildup

11 марта, 2023 Technical Bulletin

When it comes to forklift tires, heat buildup is a key contributor to tire failure. The lower the heat buildup, the more durable a tire can be.

Читать далее

MAXAM on When a Producer Should Replace Their Agricultural Tires

20 июня, 2022 Technical Bulletin

In the agricultural industry, it is how the equipment is utilized or the inherent operational requirements that will affect the tire replacement cycle. As agricultural tires are considered off-road and not US Department of Transportation (DOT) regulated, there are no firm rules to determine when an ag tire absolutely needs to be replaced....

Читать далее

When should you replace solid OTR tires?

16 мая, 2023 Technical Bulletin

While solid OTR tires require zero maintenance and are built to last much longer than foam filled pneumatics, they still have a certain life span. Although these tires don’t require the maintenance pneumatic off-the-road tires require, MAXAM recommends operations inspect their solid OTR tires every now and then.

Читать далее

Присоединяйтесь к нашей сети

Подпишитесь на нашу рассылку, чтобы получать последние новости, предложения по изделиям и эксклюзивные материалы напрямую в свой почтовый ящик.