What are the three types of tire construction?

Maio 24, 2023

What are the three types of tire construction?

Radial, bias, and solid are the three different types of tire constructions. Each construction has its strengths and it is important to pick the correct tire for your application.


Bias tires

Bias tires are made of layers of nylon plies in a crisscross pattern, placed at angles of 30-40 degrees. The plies are laid at opposing angles forming an x-pattern to which the tire tread is applied too. The main advantage of a bias ply tire is that they deliver a smooth ride on rough surfaces enhancing operator comfort and they have the ability to withstand high loads. Although, bias tires can be more sensitive to overheating and can lead to increased wear rates and fuel consumption rates.

Radial Tires

Radial tires are manufactured with the tire’s body plies running radially, perpendicular to the circumference of the tire allowing the tire to flex more and permitting a larger footprint. MAXAM’s radial tires achieve a longer and more even tread wear, along with delivering a higher resistance to cuts and punctures decreasing repairs costs on job sites. Disadvantages include a harder ride at low speeds on rough roads, a more rigid sidewall, and a lower grip at slow speeds.

Solid Tires

Solid Tires are best for tough applications that have a high risk of impact and damage. They are extremely stable, puncture resistant, and maintenance-free as they are non-pneumatic, meaning that they are not filled with air. Solid tires eliminate the threat of blowouts and can handle significantly higher weight per load than pneumatic tires. The disadvantages of solid tires are that they cannot operate at high speeds and the upfront cost is higher.

Not sure what series would be the right tire for your operation? Reach out to our team below:

[hubspot portal=”22229044″ id=”6811e594-fcca-41d1-a2fa-9018cf75c2c1″ type=”form”]

Centro de recursos

A MAXAM Tire é um líder global e fabricante de pneus especiais desenhados e construídos especificamente para si.

EcoPoint³’s effect on reducing heat buildup

Março 11, 2023 Technical Bulletin

When it comes to forklift tires, heat buildup is a key contributor to tire failure. The lower the heat buildup, the more durable a tire can be.

Ler mais

MAXAM on When a Producer Should Replace Their Agricultural Tires

Junho 20, 2022 Technical Bulletin

In the agricultural industry, it is how the equipment is utilized or the inherent operational requirements that will affect the tire replacement cycle. As agricultural tires are considered off-road and not US Department of Transportation (DOT) regulated, there are no firm rules to determine when an ag tire absolutely needs to be replaced....

Ler mais

When should you replace solid OTR tires?

Maio 16, 2023 Technical Bulletin

While solid OTR tires require zero maintenance and are built to last much longer than foam filled pneumatics, they still have a certain life span. Although these tires don’t require the maintenance pneumatic off-the-road tires require, MAXAM recommends operations inspect their solid OTR tires every now and then.

Ler mais

Junte-se à nossa rede

Subscreva a nossa newsletter para receber as últimas notícias, ofertas de produtos e conteúdos exclusivos diretamente na sua caixa de correio.