Proper road conditions for OTR tires

juin 27, 2023

Proper road conditions for OTR tires

Having proper road conditions not only helps ensure maximum safety on your job site but also extends tire life for your application.

Key aspects of road conditions include:

  1. Road width
  2. Drainage
  3. Road grade
  4. Road care

I. Road width

Road width should be determined by the width of the vehicle. Your additional lane should double the width of your vehicle. For example, if your vehicle’s width is 8 feet, the other lane should be about 16 feet. Similarly, if your vehicle is 12 feet, the other lane should be 24 feet.

Truck Width12 ft.16 ft.20 ft.24 ft.28 ft.
Lane Width24 ft.32 ft.40 ft.48 ft.56 ft.

II. Drainage

Sharp debris can be hidden by water when the haul road isn’t properly drained and such debris can easily damage your tire.

III. Road grade

Grades can cause tires to wear quickly, below is a table that illustrates how each increases in the percentage of road grade decreases tire life. Once the grade percentage is past 10%, tire life quickly and significantly decreases.

% GRADE

0%

6%

10%

14%

18%

% Tire Life

100%

90%

80%

65%

50%

To calculate road grade percentage, take the following formula:

IV. Road care

Having proper road maintenance established is critical to ensuring tire life. Below is how each road care and its aspects can impact your OTR tires.

Road care Impact on tires
Smoother road surfacePrevents cuts, punctures, breaks, and separations
Reduced gradesReducing excess wear on tires, extending tire life
Wider road widthAllows optimum safety
Wider punctures radius and no negative curvesReduces spillage and less cut damage to tires, extends casing life by eliminating high lateral tire forces
Proper hauling distancesReduces chances of heat separations from excessive TMPH/TKPH
Drainage systemReduces potential deep cuts and cut separations from sharp debris

Summary

Haul roads should be wide, clean, and without ruts. Road crown should be about 3%.

In addition to the big four factors discussed above, the below job profile also impacts tire life.

  • Length of Haul
    (Heat Build-Up)
  • Cycle Times (Speeds)
  • Work Schedule
  • Grades
  • Curves
  • Underfoot Conditions
  • Actual Loads/
    Load Distribution

Should you need further assistance, contact your local MAXAM rep and we’ll assist you with your inquiries.

Centre de ressources

MAXAM Tire est un fabricant et un leader mondial de pneus spéciaux conçus et fabriqués sur mesure pour vous.

EcoPoint³’s effect on reducing heat buildup

mars 11, 2023 Technical Bulletin

When it comes to forklift tires, heat buildup is a key contributor to tire failure. The lower the heat buildup, the more durable a tire can be.

Lire la suite

MAXAM on When a Producer Should Replace Their Agricultural Tires

juin 20, 2022 Technical Bulletin

In the agricultural industry, it is how the equipment is utilized or the inherent operational requirements that will affect the tire replacement cycle. As agricultural tires are considered off-road and not US Department of Transportation (DOT) regulated, there are no firm rules to determine when an ag tire absolutely needs to be replaced....

Lire la suite

When should you replace solid OTR tires?

mai 16, 2023 Technical Bulletin

While solid OTR tires require zero maintenance and are built to last much longer than foam filled pneumatics, they still have a certain life span. Although these tires don’t require the maintenance pneumatic off-the-road tires require, MAXAM recommends operations inspect their solid OTR tires every now and then.

Lire la suite

Rejoignez notre réseau

Abonnez-vous à notre lettre d’information pour recevoir les dernières actualités, les offres sur les produits et découvrir des contenus exclusifs, directement dans votre boîte de réception.