How to Choose an Application-Specific Construction Tire?

May 24, 2023

How to Choose an Application-Specific Construction Tire?

In the construction industry, time means money and with an abundance of jobs occurring, construction business owners need to make the most of every moment to maximize profits. Outfitting equipment with application-specific construction tires can help cut costs and increase productivity levels but, how do you know you are picking the correct tire for your application? Below are three main questions to ask when choosing an application-specific construction tire.


TRA Type

Do you know what type of tire you need? Each construction tire is classified by TRA Type to simplify the selection process. TRA codes refer to the tire’s classification and tread depth. For example, a TRA of L3 means the tire is a loader-classified tire with a level 3 tread depth. Keep in mind, the tread depth of the tire increases as the TRA code level increases making it crucial to understand your tires’ TRA code to ensure proper performance.

There are 4 TRA Types:

  • C = Compactor
  • G = Grader
  • E = Earthmoving
  • L = Loader and bulldozer

Within these 4 tire types, there are also different tread depths and tread patterns, for very specific uses. These differences are indicated by a number. The choice of this number should be based on the type of ground you are operating within and the tires condition of use

There are 6 different tread depths:

  • 1 = Ribbed (normal tread depth)
  • 2 = Traction (normal tread depth)
  • 3 = Normal (normal tread depth)
  • 4 = Deep (deep tread depth)
  • 5 = Very deep (very deep tread depth)
  • 7 = Flotation (normal tread depth)

Roadability

Will your machine be trailered or roaded from job to job? This is an important question to ask yourself before purchasing a tire for your application. A construction tire’s design and compounding will restrict how far and fast you can travel on the job site. For your convenience, MAXAM has a list of load index and speed symbols to help you sort out what series would work for your application.

Terrain

Will your machine be operating on soft or hard surfaces? Construction equipment operating in mostly soft soil or mud benefits from a tire with deep lugs. Deep lugs deliver enhanced traction, reduce slippage in soft conditions, and can have self-cleaning capabilities increasing run time on your site. Equipment working on hard surfaces benefits from a tire with a block-type tread pattern. Block-type tread patterns provide a comfortable ride, decrease the chances of suffering a flat, increase fuel economy, and wear at slower rates.

Still not sure which series is right for you? Reach out to our team below:

[hubspot portal=”22229044″ id=”6811e594-fcca-41d1-a2fa-9018cf75c2c1″ type=”form”]

リソースセンター

MAXAM Tireは、お客様の用途に応じて特殊タイヤを設計、カスタムメイドする世界的なトップメーカーです。

EcoPoint³’s effect on reducing heat buildup

March 11, 2023 Technical Bulletin

When it comes to forklift tires, heat buildup is a key contributor to tire failure. The lower the heat buildup, the more durable a tire can be.

詳細を読む

MAXAM on When a Producer Should Replace Their Agricultural Tires

June 20, 2022 Technical Bulletin

In the agricultural industry, it is how the equipment is utilized or the inherent operational requirements that will affect the tire replacement cycle. As agricultural tires are considered off-road and not US Department of Transportation (DOT) regulated, there are no firm rules to determine when an ag tire absolutely needs to be replaced....

詳細を読む

When should you replace solid OTR tires?

May 16, 2023 Technical Bulletin

While solid OTR tires require zero maintenance and are built to last much longer than foam filled pneumatics, they still have a certain life span. Although these tires don’t require the maintenance pneumatic off-the-road tires require, MAXAM recommends operations inspect their solid OTR tires every now and then.

詳細を読む

MAXAMのネットワークに参加する

MAXAMのニュースレターをご購読いただくと、最新ニュース、製品情報、限定コンテンツなどの情報をお届けいたします。